Quote:
Originally Posted by james schaechter
Did all of the bolt holes line up Or did you need to re drill some on the lower half?
|
The Quicktime part number 1/4" mid-plate I used is 6093, it is really only a spacer plate at the block upper half with mounting tabs and not a true full mid-plate. I cut the tabs off the side. Thus there are no holes on the lower area to align with the bellhousing. Obviously I still used the blocker saver plate that comes with the Mcleod bellhousing.
https://www.holley.com/products/driv.../parts/RM-6093