CLASS RACER FORUM - View Single Post

slick5861 · 08-30-2015, 09:01 PM

I removed the front spring, installed the top threaded rod of the shock through the top hole, put the washer and bolt on , not to tight. Then slid the spring back into place and jacked up the lower control arm. This was the only way I could get it in.

08-30-2015, 09:01 PM	#4
slick5861 Junior Member Join Date: Sep 2008 Location: East St Paul,Manitoba Canada Posts: 23 Likes: 7 Liked 2 Times in 2 Posts	Re: Front shock install problem I removed the front spring, installed the top threaded rod of the shock through the top hole, put the washer and bolt on , not to tight. Then slid the spring back into place and jacked up the lower control arm. This was the only way I could get it in.