Quote:
Originally Posted by Harry 6674
I would try to verify that the chassis is straight and true. The addition of a rollbar shouldn't have caused the problems unless it was installed with chassis not level and well supported if you know what I mean. Or maybe the chassis was tweaked before the rollbar was installed and was corrected and the alignment will bring the handleing back Good luck.
|
The guy who put in the roll bar has done them before. Now that I think about it he did replace some rusted floor panels before installing the bar. He had the car suspended with 4 jack stands during all the work. Maybe the frame got miss aligned when replacing the floors before putting in the bars.
