Quote:
Originally Posted by Mike Pearson
The axle is out of alignment and putting pressure on that bearing or the tire has a weird wear pattern putting pressure on the bearing.
|
I have looked at the axle pretty close and can find nothing.
The tire has no unusual wear pattern and looks no different than the other tires.
I may try to move the tire to another axle or move it to the spare.
The tires are almost 3 years old and will be changed out over the winter.
I always balance the tires so that should not be an issue either.
I have checked and looked and I am still at a loss to figure it out.
Same bearing twice now, it just makes no sense to me.
The loading on the road side with the tool cabinet and a generator has been the only thing I had not considered.
The trailer does have about 1500 lbs in tongue weight so the front axle is probably loaded heavier than the other two.
I hope the China bearing change to the USA made makes the difference.
Thanks for every ones suggestions.
I appreciate the help.
Rick Cates