CLASS RACER FORUM - View Single Post

Mark Ugrich · 10-15-2019, 04:15 PM

I just finished installing a set of 9” REM polished Gleason gears.I don’t think the REM polish will help with performance as much as wear reduction.I also micro blued all the bearings.It certainly helped the rotating torque, but again I doubt I’ll see any performance advantage.The micro blue stuff will most likely help in reducing wear and oil temps depending on the parts that are coated.I wouldn’t change gear ratio because of the polish or coatings.

10-15-2019, 04:15 PM	#4
Mark Ugrich Member Join Date: May 2011 Location: Auburndale,Florida Posts: 201 Likes: 20 Liked 57 Times in 32 Posts	Re: REM and Surface Treatments I just finished installing a set of 9” REM polished Gleason gears.I don’t think the REM polish will help with performance as much as wear reduction.I also micro blued all the bearings.It certainly helped the rotating torque, but again I doubt I’ll see any performance advantage.The micro blue stuff will most likely help in reducing wear and oil temps depending on the parts that are coated.I wouldn’t change gear ratio because of the polish or coatings.