CLASS RACER FORUM - View Single Post - Thoughts on Moroso Trick Springs (Foxbody)

JHeath · 01-31-2018, 08:37 PM

I used a compressor like this, removed the hook by the bolt head, and put a round plate there, the other hook was hooked into the spring, then I ran the threaded shaft thru the hole in the control arm with the bolt on plate under the arm.

01-31-2018, 08:37 PM	#11
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 788 Likes: 2,890 Liked 370 Times in 102 Posts	Re: Thoughts on Moroso Trick Springs (Foxbody) I used a compressor like this, removed the hook by the bolt head, and put a round plate there, the other hook was hooked into the spring, then I ran the threaded shaft thru the hole in the control arm with the bolt on plate under the arm. Attached Thumbnails __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"