CLASS RACER FORUM - View Single Post

GTX JOHN · 01-20-2018, 04:48 PM

I have a dozen cars with John's springs and shocks.

A couple are Heavy and have over 500 runs on them
in last ten years and we have not noticed any issues.

We adjust them accorded to his directions and make sure that nothing
is binding and everything is free moving. Perhaps the geometry on the spring you are
using is not compatible....We bought a car with Mopar Superstock springs
and Calvert bars and it was so bound up that it may as well been mounted
solid!

I have never tried them without his springs or driven them extensively
on the street.

His stuff is the best things we have every used on suspension......Use his Shocks/Struts
and other suspension pieces as well.

01-20-2018, 04:48 PM	#5
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,530 Likes: 2,222 Liked 1,809 Times in 572 Posts	Re: Bent Landrum spring I have a dozen cars with John's springs and shocks. A couple are Heavy and have over 500 runs on them in last ten years and we have not noticed any issues. We adjust them accorded to his directions and make sure that nothing is binding and everything is free moving. Perhaps the geometry on the spring you are using is not compatible....We bought a car with Mopar Superstock springs and Calvert bars and it was so bound up that it may as well been mounted solid! I have never tried them without his springs or driven them extensively on the street. His stuff is the best things we have every used on suspension......Use his Shocks/Struts and other suspension pieces as well. __________________ John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 02-07-2018 at 04:35 AM.