CLASS RACER FORUM - View Single Post - C4 Corvette build for Superstock I-J-K

ski_dwn_it · 10-30-2019, 10:51 AM

I am reffering to the area around where the stock 4 link brackets bolted in. Just inside of that area I have seen people run the crossmember straight across to other side. I see you really chopped that area away.

Straight across is what I planned on doing and then to further reinforce it put two 45degree bars up to the frame rail area adjacent where your outside left hip would be if you were sitting in the drivers seat of the car. The other bar would be your passengers outside right hip area.

I already have a slick way to hold up trans and not compromise ground clearance. I plan on just utilizing that way with the new build.

10-30-2019, 10:51 AM	#9
ski_dwn_it Junior Member Join Date: Dec 2014 Posts: 5 Likes: 0 Liked 4 Times in 2 Posts	Re: C4 Corvette build for Superstock I-J-K I am reffering to the area around where the stock 4 link brackets bolted in. Just inside of that area I have seen people run the crossmember straight across to other side. I see you really chopped that area away. Straight across is what I planned on doing and then to further reinforce it put two 45degree bars up to the frame rail area adjacent where your outside left hip would be if you were sitting in the drivers seat of the car. The other bar would be your passengers outside right hip area. I already have a slick way to hold up trans and not compromise ground clearance. I plan on just utilizing that way with the new build.