[Travis Miller]

Now that racing season is over for a while, let's share some stories from our past concerning anything to do with cars. I'll start it off....

Back in my teenage years I worked in a machine shop. I was using a cylinder hone on a 6 cylinder Chevy block. This was the finger type hone with stones where you rough hone first then work your way up using finer grit stones. The block was sitting on the shop floor in the area where we usually used the hone. Lunch time was approaching so I thought I would do the job a little quicker. Tightening the hone up a little more surely would speed up the process, or so I thought. When I hit the trigger on the huge (and powerful) 1/2 inch drive drill, the hone locked solid to the cylinder wall. I released the trigger immediately but somehow the button had gotten pressed that held the trigger wide open and away we went across the floor. Round and round the 6 cylinder block went with me along for the ride. After several laps, with the cord of the drill rapping around me, the plug finally pulled out of the wall outlet. After that day I never ever tried to speed up any process using power tools. That was a lesson learned the hard way.