CLASS RACER FORUM - View Single Post

Joe Martens · 08-02-2007, 10:09 PM

Phil, not sure where you looked, but on page 227 of the 2007 NHRA Rulebook, it's fairly descriptive. What I did was seal off the trunk behind the rear seat and package shelf with .032 aluminum, and had a battery tray fabricated and bolted to the frame section through the trunk floor with 3/8 bolts. The battery is secured to the battery tray with 2 3/8 threaded rods with a tubular strap along the top of the battery.
Hope this helps.

08-02-2007, 10:09 PM	#2
Joe Martens Senior Member Join Date: Dec 2001 Location: North Olmsted, Ohio Posts: 772 Likes: 556 Liked 181 Times in 62 Posts	Re: Battery box Phil, not sure where you looked, but on page 227 of the 2007 NHRA Rulebook, it's fairly descriptive. What I did was seal off the trunk behind the rear seat and package shelf with .032 aluminum, and had a battery tray fabricated and bolted to the frame section through the trunk floor with 3/8 bolts. The battery is secured to the battery tray with 2 3/8 threaded rods with a tubular strap along the top of the battery. Hope this helps. __________________ Joe Martens A/Stock 3969 Last edited by Joe Martens; 08-02-2007 at 10:32 PM.