CLASS RACER FORUM - View Single Post

bigblockwagon · 08-23-2008, 04:01 PM

Currently shift at 7300 and go thru lights at about 6100 in third (would probably be closer to 7400 on a quarter mile track). As best as i can remember without checking, valve to piston clearance is approx .120 intake and .140 exhaust. Present rockers are Crane aluminum rollers, stud mount. That Jesel deal sounds a little pricey for a budget street car class. How much spring pressure and lift could I get away with using stud mount rockers?

Scott

08-23-2008, 04:01 PM	#8
bigblockwagon Junior Member Join Date: Jan 2006 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Re: Looking for BBC intake suggestions Currently shift at 7300 and go thru lights at about 6100 in third (would probably be closer to 7400 on a quarter mile track). As best as i can remember without checking, valve to piston clearance is approx .120 intake and .140 exhaust. Present rockers are Crane aluminum rollers, stud mount. That Jesel deal sounds a little pricey for a budget street car class. How much spring pressure and lift could I get away with using stud mount rockers? Scott