[CraigG]

Thanks guys

What would be a good drag racing alignment set up Stock A arms specs?

72 GTO 3400 pound, 455, Turbo 400 with 5000 stall converter? sometimes with Using the trans brake, 4.10 rear gear, 10.5W x 12 M.T. bias slicks

Front: #200 Tall Landrum Front Springs, Double adjustable AFCO Racing Eliminator BNC2 Valving Shocks 3850F/BNC2,Offset front shafts, bump steer correction steering knuckle levers, good bushings and low friction ball joints, travel "5.5

Rear: Double adjustable rear shocks with full-length adjustable ladder bars.

Pulls the wheels 2 feet and runs 9.90's - 10.10's at 130's with 1.38 - 1.44 60's

Thanks again for all your good input.
Craig