View Single Post
Old 02-06-2024, 12:41 PM   #8
JP1738
Senior Member
 
JP1738's Avatar
 
Join Date: Jan 2024
Location: Charlotte, NC
Posts: 566
Likes: 1,614
Liked 1,173 Times in 333 Posts
Default Re: Too Slow/Q-Jet question

Quote:
Originally Posted by Adger Smith View Post
I'm not a real Q-Jet tuner, but I question the 6.5 lb fuel pressure.
N/S area vs the small float
What do the experts say about that?
I have had Q-Jet customers that are very particular about regulator location and fuel line routing to the carb...
OK What you say Q-Jet experts??
I also have an inline fuel filter after the regulator between that and the carb. Tim Stick advised I 86 that and he's probably right. I put it there because the car had been sitting for a long time and there was a bunch of gunk and trash in the tank and line. I cleaned and flushed everything best I could, but I stuck a filter on it to catch anything I missed just to be safe. I plan to remove that as soon as I get to work on the car again.
__________________
Dawson Pauley
#2827 N/SA 1980 Malibu SW 2S 305/180
#2827 S/ST 1978 Mazda RX7 w/ 383 sbc/glide

Last edited by JP1738; 02-06-2024 at 12:50 PM. Reason: cant type
JP1738 is online now   Reply With Quote
Liked