View Single Post
Old 01-08-2024, 06:10 PM   #5
Tom Goldman
VIP Member
 
Tom Goldman's Avatar
 
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,474
Likes: 885
Liked 859 Times in 234 Posts
Default Re: Brake Fluid Question

Quote:
Originally Posted by 1320racer View Post
Tom, I have tried Wilwood’s Hi Temp 570 and it too overheated, burnt and was black sludge, just as bad as DOT3, 4 and 4.5. Again the only fluid that I have used that doesn’t burn, overheat, cook, turn black is DOT5
probably because we dont use the chutes .
The silicone fluid has it's pluses for sure ,but silicone has 3 times more compression than regular fluid .
Not something that a foot brake racer might feel comfortable with.
The 570 and 600 works pretty well on Stock Super Stock type cars . ...The Motul fluid in my opinion is even better than the Wilwood fluid .
I used to do SCCA inspections and maintenance on several road race Corvettes .Fluid flush and change is required before EVERY event....All fluids brands show some degradation .
The Motul fluid really was superior to most of the others ,only Wilwood 600 was as good . We're talking cars that get the brakes so hot that the caliper piston boots melt or burn up and the rotors dont last more than 2 races!
__________________
Tom Goldman 1500 SG , 1506 STK
Tom Goldman is offline   Reply With Quote