CLASS RACER FORUM - View Single Post

Terry Friar · 01-28-2022, 05:47 PM

We're running a '69 Chevelle with "stock" engine/trans placement. It's a powerglide. I originally tried a TCI aluminum trans shield, but there was no way it was going to fit. It was hard into the tunnel and the trans still needed to go up about an inch or so. I've been running a Stroud blanket, but I'm constantly fighting to keep the ends of attaching straps from hanging down... as in multiple zip ties! Is there a good fitting aluminum shield for a glide that will fit the stock tunnel? Thanks!

01-28-2022, 05:47 PM	#1
Terry Friar Junior Member Join Date: Dec 2013 Posts: 10 Likes: 9 Liked 16 Times in 2 Posts	Transmission shield fit? We're running a '69 Chevelle with "stock" engine/trans placement. It's a powerglide. I originally tried a TCI aluminum trans shield, but there was no way it was going to fit. It was hard into the tunnel and the trans still needed to go up about an inch or so. I've been running a Stroud blanket, but I'm constantly fighting to keep the ends of attaching straps from hanging down... as in multiple zip ties! Is there a good fitting aluminum shield for a glide that will fit the stock tunnel? Thanks!