CLASS RACER FORUM - View Single Post

mschafer · 04-23-2021, 12:35 PM

I run a reverse pattern 400 with a quarter stick and Shifnoid setup. had a problem with 2-3 shift until I figured out the pressure on the rooster comb was to high, relieved some of the tension by adding a couple flat washers between valve body and detent roller spring assembly as solenoid couldn't overcome down pressure.

04-23-2021, 12:35 PM	#3
mschafer Junior Member Join Date: Oct 2014 Posts: 44 Likes: 0 Liked 13 Times in 9 Posts	Re: Reverse pattern shifter I run a reverse pattern 400 with a quarter stick and Shifnoid setup. had a problem with 2-3 shift until I figured out the pressure on the rooster comb was to high, relieved some of the tension by adding a couple flat washers between valve body and detent roller spring assembly as solenoid couldn't overcome down pressure.