Thread: Cool cans
View Single Post
Old 12-26-2020, 01:32 PM   #9
Doug Domm
Member
 
Join Date: Apr 2006
Location: canada
Posts: 251
Likes: 29
Liked 84 Times in 21 Posts
Default Re: Cool cans

My experience with the blue Moroso cool can was not very good. One day in the shop I turned on the fuel pump before starting the car and noticed the fuel pressure didn’t bump up as normal and a few seconds later could smell fuel. I turned off the pump and went to explore. As I got to the front of the car I found the floor around the front of the car covered in fuel and the cool can itself overflowing of fuel. After taking it apart I found the top gasket of the heat sink had failed and filled the ice reservoir and flowing out past the lid. With that top plate of the heat sink removed I also discovered that all of my efforts in building the fuel system with the least amounts of turns and bends and as gentle of turns I could create was a total waste of effort because as soon as the fuel got to that heat sink it was met with a series of walls and blunt corners. Personally I would never replace it especially after that experience. One could only imagine how disastrous things may have resulted.
Doug Domm is offline   Reply With Quote
Liked