CLASS RACER FORUM - View Single Post

Mark Ugrich · 08-18-2018, 09:47 AM

Ed,on my 65 Mustang , which has a similar front suspension, I fabricated a 90 degree bracket from 1/4” steel. Mounted it on the frame rail between the control arms and added an adjustable threaded bumper. The upper control arm will need a 3/16 or so bump pad welded behind the ball joint on the underside of the arm. Keep in mind the control arm is not level and you will need to match the angle. It’s simple and easy to adjust.

08-18-2018, 09:47 AM	#2
Mark Ugrich Member Join Date: May 2011 Location: Auburndale,Florida Posts: 220 Likes: 29 Liked 71 Times in 38 Posts	Re: Front end limiters Ed,on my 65 Mustang , which has a similar front suspension, I fabricated a 90 degree bracket from 1/4” steel. Mounted it on the frame rail between the control arms and added an adjustable threaded bumper. The upper control arm will need a 3/16 or so bump pad welded behind the ball joint on the underside of the arm. Keep in mind the control arm is not level and you will need to match the angle. It’s simple and easy to adjust.