CLASS RACER FORUM - View Single Post

Tom Goldman · 07-23-2018, 09:07 PM

While there are direct bolt on hubs available for various Ford and GM columns ,I don't know of any that fit the earlier Mopar splines.
I would replace the stock shaft with a .065"x .750" chromemoly shaft and replace the stock bearings in the tube with a nylon bushing.
By using the 3/4" shaft you can choose from dozens of quick release hubs.
Borgeson has couplers for just about any steering box or you could machine the trunion shaft to fit the 3/4" tube.

07-23-2018, 09:07 PM	#2
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 892 Liked 883 Times in 237 Posts	Re: Quick release steering wheel While there are direct bolt on hubs available for various Ford and GM columns ,I don't know of any that fit the earlier Mopar splines. I would replace the stock shaft with a .065"x .750" chromemoly shaft and replace the stock bearings in the tube with a nylon bushing. By using the 3/4" shaft you can choose from dozens of quick release hubs. Borgeson has couplers for just about any steering box or you could machine the trunion shaft to fit the 3/4" tube. __________________ Tom Goldman 1500 SG , 1506 STK