Quote:
Originally Posted by James L Miller
Right, the LD4B was the 273 intake, D4B for the early heads with the different bolt angle. We better not talk anymore about the intakes with Billy Nees on here watching.☺
Now you got me thinking about converting my street car (1969 Barracuda, 340, 4-speed) over to a stocker again. Since it is an original 340 car I didn't want to put a roll bar in it. My racer friends thought I was crazy wanting to race it without a roll bar. With the 160 MPH "Stockers" out there, they have a point. I figure the 318-2bbl combo would drop me down to R/SA where I wouldn't need the roll bar. If I put a roll bar in it, I might as well build a 383 for it. It has less HP than the 340 with basically the same AVS, bigger valves, slightly better heads, more cubes, etc. More weight on the nose though.
|
But, with the E heads and intake it should be close to a 318 in weight. BB heads flow way more than a J head and can ring em just as high as the 340, got straight pushrods and easy tear down. Only limitation is valve to piston clearance with the good cams. Do a bolt in roll bar. But A 318 would be easier on drive line componites and tires. A lot to decide.