CLASS RACER FORUM - View Single Post

jwdsg2101 · 05-04-2016, 01:52 PM

Thanks for the reply. The stater was pinned with a set screw and since the trans had 210 psi idling in low gear I figured it had to be the converter. Will check to see if the pin is still in place.

05-04-2016, 01:52 PM	#3
jwdsg2101 Junior Member Join Date: May 2016 Posts: 2 Likes: 0 Liked 0 Times in 0 Posts	Re: powerglide Thanks for the reply. The stater was pinned with a set screw and since the trans had 210 psi idling in low gear I figured it had to be the converter. Will check to see if the pin is still in place.