CLASS RACER FORUM - View Single Post

Alan Roehrich · 11-25-2007, 01:14 PM

Correct. If you want a Speed Pro Dykes ring set, you have to "build" it from "open stock" rings.

Total Seal will make most anything you want, but Keith Jones (the guy I work with at Total Seal) is not a fan of Dykes rings. Keith will likely advise you to go metric with spacers, and put a custom low tension Speed Pro SS-50U series oil ring together. But he WILL do a Dykes setup if that's what you want.

11-25-2007, 01:14 PM	#7
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: Oil Passing By Rings Correct. If you want a Speed Pro Dykes ring set, you have to "build" it from "open stock" rings. Total Seal will make most anything you want, but Keith Jones (the guy I work with at Total Seal) is not a fan of Dykes rings. Keith will likely advise you to go metric with spacers, and put a custom low tension Speed Pro SS-50U series oil ring together. But he WILL do a Dykes setup if that's what you want. __________________ Alan Roehrich 212A G/S