CLASS RACER FORUM - View Single Post

SSDiv6 · 08-11-2015, 08:02 PM

It's not legal.
The air cleaner rule you have to follow is the same as for Super Stock class.

AIR CLEANERS
Optional. If used, air cleaner must be OEM automotive or retain
OEM configuration. Air-cleaner base may be cut or trimmed, but
welding, bolting, riveting, epoxying, or any other form of fabrication
prohibited. Ram tubes, velocity stacks, or other than stock-type
base plates or ducting prohibited. Cooling holes prohibited in
radiator side panels, etc. Factory air cleaners and/or scoops that fit
through hood must be affixed to carburetor as per OEM only.

08-11-2015, 08:02 PM	#2
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,045 Likes: 712 Liked 1,597 Times in 583 Posts	Re: carb air entry pan for the Super 10 It's not legal. The air cleaner rule you have to follow is the same as for Super Stock class. AIR CLEANERS Optional. If used, air cleaner must be OEM automotive or retain OEM configuration. Air-cleaner base may be cut or trimmed, but welding, bolting, riveting, epoxying, or any other form of fabrication prohibited. Ram tubes, velocity stacks, or other than stock-type base plates or ducting prohibited. Cooling holes prohibited in radiator side panels, etc. Factory air cleaners and/or scoops that fit through hood must be affixed to carburetor as per OEM only.