CLASS RACER FORUM - View Single Post

ss3011 · 04-28-2015, 09:02 AM

I have an Intercont Transmission tester, which is powered by a propane fueled Iron Duke. I bought all the adapter plates to bolt up almost any RWD transmission. It uses an inertia wheel to put a load on the trans during testing, and a hydraulic brake to slow the wheel back down. I have seen similar machines at several major production transmission rebuilders. I believe Intercont was bought out by Axi-Line, and then Axi-Line was merged with SuperFlow. I think this machine would do any type of race transmission testing you would want to do, and in a safe manner.

04-28-2015, 09:02 AM	#7
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 909 Likes: 70 Liked 239 Times in 114 Posts	Re: transmission test stand I have an Intercont Transmission tester, which is powered by a propane fueled Iron Duke. I bought all the adapter plates to bolt up almost any RWD transmission. It uses an inertia wheel to put a load on the trans during testing, and a hydraulic brake to slow the wheel back down. I have seen similar machines at several major production transmission rebuilders. I believe Intercont was bought out by Axi-Line, and then Axi-Line was merged with SuperFlow. I think this machine would do any type of race transmission testing you would want to do, and in a safe manner.