CLASS RACER FORUM - View Single Post

Alan Roehrich · 04-23-2015, 01:40 PM

I use 885 at the suggestion of Darin Morgan of RMS and Profiler Cylinder Heads.

I pour each side of the block 48 hours apart. I bolt cylinder heads on during the curing process. And I wait a week after the second side was poured before any other work is done. I torque the heads and mains to spec for curing.

I think the name of the company I buy mine from is Red Cap Supply.

04-23-2015, 01:40 PM	#6
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: Embecco/Masterflow 855 or 885 I use 885 at the suggestion of Darin Morgan of RMS and Profiler Cylinder Heads. I pour each side of the block 48 hours apart. I bolt cylinder heads on during the curing process. And I wait a week after the second side was poured before any other work is done. I torque the heads and mains to spec for curing. I think the name of the company I buy mine from is Red Cap Supply. __________________ Alan Roehrich 212A G/S