View Single Post
Old 04-16-2015, 10:20 AM   #4
Keith 944
VIP Member
 
Keith 944's Avatar
 
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,193
Likes: 1,160
Liked 1,877 Times in 577 Posts
Default Re: No trans brake in pro et

Quote:
Originally Posted by theman440 View Post
Just don't use it @ the line.
As captain obvious stated, if you are not in the northeast, the electronics rules may not apply. here is what is allowed in div 1. (some tracks have their own policy)

Taken from the Northeast Division Schedule, Rules and Regulations:

17. Pro Eliminator (9.00-17.99) will be a NO-electronics class. Electronic ignition and single-stage (high side) rev-limiter will be accepted. Non-drive wheel line-locs will be accepted but wiring must be direct and traceable. Nitrous, must be activated by driver switch or wide open throttle switch, single stage only, no timers. Electronics expressly forbidden, but not limited to: data recorders, transbrakes, electric/automated shifters other than factory, two-steps, electronic throttle stops, and delay devices. Reverse Trans solenoid may only be operated by a switch affixed to the shifter, such as a back up light switch.
__________________
KEITH MAYERS
2-1/2 X somebody
Still many X nobody

Last edited by Keith 944; 04-16-2015 at 10:25 AM.
Keith 944 is offline   Reply With Quote