CLASS RACER FORUM - View Single Post - Update E-F/SA Bird Build...

Alan Nyhus · 01-15-2015, 07:53 AM

oldskool: The stocker cams are still fairly inexpensive, provided you don't get into the enlarged journal stuff. Nitriding will add a 'c' note. The Schbeck ceramic puck lifters are now mfgd. by Smith Machine...lots of people use those. Very good non-ceramic lifters tool streel are available from Trend, PPPC and others. Another good one that won't break the bank are the modified Delphi lifters that have the bonded steel foot. Valve springs and valve train weight are big considerations....you cam mfg can get you steered in the right direction. -Al

01-15-2015, 07:53 AM	#250
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,180 Likes: 1,074 Liked 799 Times in 236 Posts	Re: Update E-F/SA Bird Build... oldskool: The stocker cams are still fairly inexpensive, provided you don't get into the enlarged journal stuff. Nitriding will add a 'c' note. The Schbeck ceramic puck lifters are now mfgd. by Smith Machine...lots of people use those. Very good non-ceramic lifters tool streel are available from Trend, PPPC and others. Another good one that won't break the bank are the modified Delphi lifters that have the bonded steel foot. Valve springs and valve train weight are big considerations....you cam mfg can get you steered in the right direction. -Al __________________ "That'll never work....."