CLASS RACER FORUM - View Single Post

Alan Roehrich · 11-26-2014, 08:21 PM

Dave's method is similar to mine, although I use red hi temp RTV. The suggestion to use the metal core cork gasket is a good one as well.

On the timing cover I always use a gasket, and install it dry first to set my cam end play, and then use a super thin layer of the same red hi temp RTV for final assembly.

11-26-2014, 08:21 PM	#4
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,090 Likes: 1,534 Liked 1,758 Times in 398 Posts	Re: Oil pan and timing cover gaskets Dave's method is similar to mine, although I use red hi temp RTV. The suggestion to use the metal core cork gasket is a good one as well. On the timing cover I always use a gasket, and install it dry first to set my cam end play, and then use a super thin layer of the same red hi temp RTV for final assembly. __________________ Alan Roehrich 212A G/S