CLASS RACER FORUM - View Single Post - what to use to electric shift a turbo 400

Tom Goldman · 10-12-2007, 06:23 PM

I've made a air opperated 3 speed shifter for our Super Street car from a B&M ratchet shifter, The air servo and control valve cost about $35 at Grainger. ... Use any co2 bottle and regulator.. ....The Biondo dual rpm control is the easiest way to control the shifts, altho some of the newer ignition boxes have multiple shift control capability. ... Keep in mind you can shift on time or rpm, but not a combination of the two. .... If you are interested in copying what I built , e-mail me and I'll give you a parts list and a drawing of what I did. ..... Tom

10-12-2007, 06:23 PM	#2
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 892 Liked 883 Times in 237 Posts	Re: what to use to electric shift a turbo 400 I've made a air opperated 3 speed shifter for our Super Street car from a B&M ratchet shifter, The air servo and control valve cost about $35 at Grainger. ... Use any co2 bottle and regulator.. ....The Biondo dual rpm control is the easiest way to control the shifts, altho some of the newer ignition boxes have multiple shift control capability. ... Keep in mind you can shift on time or rpm, but not a combination of the two. .... If you are interested in copying what I built , e-mail me and I'll give you a parts list and a drawing of what I did. ..... Tom __________________ Tom Goldman 1500 SG , 1506 STK