Quote:
Originally Posted by Marvin Robinson
Mike,
I'm looking for .003 - .0035 on the rods, and I'm at .0023. My simplest solution would be to have the machine shop take the throws to 2.4985. Right now they are 2.5000 - 2.4999. I don't want to go to .010 under, that would require getting all new bearings as well, and put me into a 3-4 week wait. (I also wonder if .010, or even .0015 would take out enough metal to warrant a rebalance).
|
No you will be fine. A good crank grinder should be able to have the crank back to you in a few hours. MB.