CLASS RACER FORUM - View Single Post

Marvin Robinson · 05-28-2014, 10:39 AM

Mike,

I'm looking for .003 - .0035 on the rods, and I'm at .0023. My simplest solution would be to have the machine shop take the throws to 2.4985. Right now they are 2.5000 - 2.4999. I don't want to go to .010 under, that would require getting all new bearings as well, and put me into a 3-4 week wait. (I also wonder if .010, or even .0015 would take out enough metal to warrant a rebalance).

05-28-2014, 10:39 AM	#11
Marvin Robinson Member Join Date: Jun 2005 Location: Gary, IN Posts: 139 Likes: 0 Liked 0 Times in 0 Posts	Re: Crank polishing Mike, I'm looking for .003 - .0035 on the rods, and I'm at .0023. My simplest solution would be to have the machine shop take the throws to 2.4985. Right now they are 2.5000 - 2.4999. I don't want to go to .010 under, that would require getting all new bearings as well, and put me into a 3-4 week wait. (I also wonder if .010, or even .0015 would take out enough metal to warrant a rebalance). __________________ Marvin Robinson 3188 STK/SS Last edited by Marvin Robinson; 05-28-2014 at 10:41 AM.