[Charlie Laraia]

Eman,

My 3rd gen always wobbled when it landed. It did this in spite of all new front end parts, a bump steer kit and a steering damper. This past winter I went through the front end again but I made a few changes.

I found that the rod ends included in the bump steer kit did not have enough range of motion. This caused the front end to bind up and pull the wheels in odd directions when it was in the air and then when it landed. I put chrome molly rod ends with increased range of travel (available from Summit), and it helped that problem.

I assume your car does not have a front sway bar. Did you replace it with a support bar to tie the front of the sub frame together? I put in a bolt in one from Spoehn. I welded it in, and I also welded the passenger side mount for it to the sub frame, and I also welded the steering box mount to the sub frame also. It seems to have really made the car more rigid. I had the car out a few weeks ago and it did not wobble.

Good luck. Let us know how you make out.

Charlie