CLASS RACER FORUM - View Single Post

gsa612 · 09-16-2013, 05:26 PM

I run the same 402/315 but in a Camaro, it all depends on the cam, lobe sep.etc. I run a 4.56 with a tight cam,2.75 low, 4800 flash.I think you would lose 60' and ET with a heavy car like yours by changing the SLR.You can get away with a little more rpm on that motor because of more exhaust lift (.430). If you run the big hoosiers 94" as opposed to the 92.5" it will give you around 200 rpm. gsa612

09-16-2013, 05:26 PM	#6
gsa612 Senior Member Join Date: Jan 2008 Location: 100th Meridian Posts: 569 Likes: 116 Liked 280 Times in 139 Posts	Re: Rear Gear Question I run the same 402/315 but in a Camaro, it all depends on the cam, lobe sep.etc. I run a 4.56 with a tight cam,2.75 low, 4800 flash.I think you would lose 60' and ET with a heavy car like yours by changing the SLR.You can get away with a little more rpm on that motor because of more exhaust lift (.430). If you run the big hoosiers 94" as opposed to the 92.5" it will give you around 200 rpm. gsa612 Last edited by gsa612; 09-16-2013 at 05:32 PM.