CLASS RACER FORUM - View Single Post

SC321X · 08-08-2012, 11:31 AM

I had problems with my 7AL2 If you don't have all the 0 retard chips plugged in the advance is wacky. Also mine had 25 deg start retard. My motor DID NOT like 25 degree retard for starting. I sent it back and had MSD change the start retard to 10 deg. I starts like a different car. (LIKE IT SHOULD) you should first check to make sure all the chips are in place. Then check connections after that you are on your own. GOOD LUCK

08-08-2012, 11:31 AM	#3
SC321X Junior Member Join Date: Apr 2010 Posts: 55 Likes: 0 Liked 3 Times in 3 Posts	Re: MSD, Timing Computers, and 16 Volts I had problems with my 7AL2 If you don't have all the 0 retard chips plugged in the advance is wacky. Also mine had 25 deg start retard. My motor DID NOT like 25 degree retard for starting. I sent it back and had MSD change the start retard to 10 deg. I starts like a different car. (LIKE IT SHOULD) you should first check to make sure all the chips are in place. Then check connections after that you are on your own. GOOD LUCK