CLASS RACER FORUM - View Single Post

Grant Eldridge · 08-06-2012, 04:55 PM

After breaking two TH-200 cases I made up a crude brace, will try to post photo below. Also, like others, put a torque strap from left cyl head to frame, and bought a cast aluminum deep oil pan from Turbo Action for extra support for the case. We do use the steel mounts front and the stock transmission mount on the rear crossmember. There have been no further case problems since these changes.
There's another thread on here "M200 breakage" showing a photo of the brace, not pretty but seems to be working so far....

Grant Eldridge
E/SA 6650
National Record Holder 2011

08-06-2012, 04:55 PM	#8
Grant Eldridge Member Join Date: Jul 2007 Posts: 124 Likes: 0 Liked 0 Times in 0 Posts	Re: Bellhousing Breakage After breaking two TH-200 cases I made up a crude brace, will try to post photo below. Also, like others, put a torque strap from left cyl head to frame, and bought a cast aluminum deep oil pan from Turbo Action for extra support for the case. We do use the steel mounts front and the stock transmission mount on the rear crossmember. There have been no further case problems since these changes. There's another thread on here "M200 breakage" showing a photo of the brace, not pretty but seems to be working so far.... Grant Eldridge E/SA 6650 National Record Holder 2011