Quote:
Originally Posted by Dragsinger
Jim, for most applications the axle bearings are sealed so they do not rely on the gear oil for lube. Check to see if that is the case for your combination.
And yes, it is very common to use 1 - 1 1/2 qts for gear oil. For my Firebird with a GM 12 bolt I run 1 1/2 qts. With our 9" fabricated housing I run 2 qts
|
To elaborate on this, the aftermarket, non-adjustable bearings normally used on Mopar rear ends are the sealed "Green" bearings. The OEM adjustable versions may require gear lube. But I haven't looked at one, much less used one for decades.