CLASS RACER FORUM - View Single Post

randy wilson · 06-20-2012, 12:07 PM

Thanks Allen. They shoudn't be in bad shape, I did the 14 gegree motor for a tractor puller, and at high rpm it blew the O ring on the filter, and I'm changing bearings, and thought I'd hit it quick. I've heard it doesn't hurt, and usually helps, so I thought I'd try it. It has .043 and 1.5 napier, and 3 mm. Is 320 OK?

06-20-2012, 12:07 PM	#3
randy wilson Senior Member Join Date: Jan 2007 Location: N/A Posts: 882 Likes: 0 Liked 22 Times in 22 Posts	Re: ball hone Thanks Allen. They shoudn't be in bad shape, I did the 14 gegree motor for a tractor puller, and at high rpm it blew the O ring on the filter, and I'm changing bearings, and thought I'd hit it quick. I've heard it doesn't hurt, and usually helps, so I thought I'd try it. It has .043 and 1.5 napier, and 3 mm. Is 320 OK? __________________ don,t have one