CLASS RACER FORUM - View Single Post

Jim Wahl · 05-07-2012, 04:29 PM

Air Cleaners:
Optional. If used,air cleaner must be OEM automotive or retain OEM configuration. Air cleaner base may be cut or trimmed, but welding, bolting, riveting, epoxying or other form of fabrication is prohibited. Ram tubes, velocity stacks or non-stock-type base plates or ducting prohibited. Cooling holes prohibited in radiator side panels, etc. Factory air cleaners and/ or scoops that fit through hood must be affixed to carburetor as per OEM only.

.

05-07-2012, 04:29 PM	#8
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,844 Likes: 667 Liked 683 Times in 129 Posts	Re: air cleaner legality question Air Cleaners: Optional. If used,air cleaner must be OEM automotive or retain OEM configuration. Air cleaner base may be cut or trimmed, but welding, bolting, riveting, epoxying or other form of fabrication is prohibited. Ram tubes, velocity stacks or non-stock-type base plates or ducting prohibited. Cooling holes prohibited in radiator side panels, etc. Factory air cleaners and/ or scoops that fit through hood must be affixed to carburetor as per OEM only. . __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association.