CLASS RACER FORUM - View Single Post

Jim Wahl · 05-06-2012, 06:16 PM

What is the carb #? Sounds as if it is going very rich. Check and make sure the secondary jet O-ring gaskets are still there and in good shape. They can become brittle when they sit unused. Also make sure your needle & seat are working properly. Float drop should never be more than 1". Set the float height at 31/32". Jim

.

05-06-2012, 06:16 PM	#4
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,844 Likes: 666 Liked 683 Times in 129 Posts	Re: Thermoquad issue or MSD box? What is the carb #? Sounds as if it is going very rich. Check and make sure the secondary jet O-ring gaskets are still there and in good shape. They can become brittle when they sit unused. Also make sure your needle & seat are working properly. Float drop should never be more than 1". Set the float height at 31/32". Jim . __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association.