CLASS RACER FORUM - View Single Post

Duane Eiskant · 01-30-2012, 07:27 PM

I hope this is an acceptable post?
I am currently working with a friend on a 2010 Camaro street car project that will see a small awount of time at the dragstrip. We have a LS based 427 cubic inch engine with a F1C Procharger that has a 92mm throttle body and a Fast LSX-R intake manifold. It is a pump gas engine with a 560 lift, 232 degrees duration at .050, Comp Cam and All-Pro aluminum heads. Boost will probably be in the 15 to 20 psi range. It will be tuned with HP Tuner through the stock ECM. Any suggestion on a size for the fuel injectors? I know its not stock or super stock, but there seems to be many knowledgable people on this site that I know can give accurate suggestions!
Thanks for such a great site, Duane

01-30-2012, 07:27 PM	#1
Duane Eiskant Junior Member Join Date: Jul 2007 Posts: 22 Likes: 0 Liked 0 Times in 0 Posts	Fuel Injector Size HELP!! I hope this is an acceptable post? I am currently working with a friend on a 2010 Camaro street car project that will see a small awount of time at the dragstrip. We have a LS based 427 cubic inch engine with a F1C Procharger that has a 92mm throttle body and a Fast LSX-R intake manifold. It is a pump gas engine with a 560 lift, 232 degrees duration at .050, Comp Cam and All-Pro aluminum heads. Boost will probably be in the 15 to 20 psi range. It will be tuned with HP Tuner through the stock ECM. Any suggestion on a size for the fuel injectors? I know its not stock or super stock, but there seems to be many knowledgable people on this site that I know can give accurate suggestions! Thanks for such a great site, Duane