Quote:
Originally Posted by Eric Merryfield
Car: old 90's stocker reborn 70/1 challenger 383 with jerico, dana 60 5.13 with what are believed to be launcher springs in the rear clamped 3 times in the front both sides, none in the rear no pinion snubber.
Car isn't lifting the front end, the rear springs separate rear end goes up and car goes forward. On the upside car even with no 60 foot 1.65-7 can still go under the index.
It looks like a street car leaving. Anyone running a pinion snubber with the leaf spring mopars?
Shall pose another thread asking about cal-tracks for stick mopars.
Thanks
Eric
|
Try this...........
Front end
Loose upper control arm bushings. (Tack the Cams locks in place)
Poly lower Bushings
Koni SPA-1 shocks or better
Loose Strut rod bushings at the K frame.
Rear
Rancho's set on full loose
Control rear separtion with rear spring clamps