CLASS RACER FORUM - View Single Post - Mopar stick racers with SS springs weight transfer problem

Eric Merryfield · 05-26-2011, 07:58 AM

Car: old 90's stocker reborn 70/1 challenger 383 with jerico, dana 60 5.13 with what are believed to be launcher springs in the rear clamped 3 times in the front both sides, none in the rear no pinion snubber.

Car isn't lifting the front end, the rear springs separate rear end goes up and car goes forward. On the upside car even with no 60 foot 1.65-7 can still go under the index.

It looks like a street car leaving. Anyone running a pinion snubber with the leaf spring mopars?

Shall pose another thread asking about cal-tracks for stick mopars.

Thanks

Eric

05-26-2011, 07:58 AM	#1
Eric Merryfield Senior Member Join Date: Apr 2008 Posts: 872 Likes: 1 Liked 502 Times in 130 Posts	Mopar stick racers with SS springs weight transfer problem Car: old 90's stocker reborn 70/1 challenger 383 with jerico, dana 60 5.13 with what are believed to be launcher springs in the rear clamped 3 times in the front both sides, none in the rear no pinion snubber. Car isn't lifting the front end, the rear springs separate rear end goes up and car goes forward. On the upside car even with no 60 foot 1.65-7 can still go under the index. It looks like a street car leaving. Anyone running a pinion snubber with the leaf spring mopars? Shall pose another thread asking about cal-tracks for stick mopars. Thanks Eric __________________ Eric Merryfield 1883 STK