CLASS RACER FORUM - View Single Post

Bimbo Jones · 05-06-2011, 02:29 PM

"I have a 12 volt mattress air pump that will push or pull air that would help remove the moisture even faster." I mentioned earlier works well pulling the moisture out. Any condensation left in the crank case will settle to the bottom and I quickly remove the oil pan drain plug and any milky oil comes out first and I replace the plug quickly as soon as it runs clear, about a 1/2 of a cup or less will do it. If I had the money I would just put a belt driven air-vac pump on it.

05-06-2011, 02:29 PM	#14
Bimbo Jones Member Join Date: Nov 2008 Posts: 109 Likes: 0 Liked 0 Times in 0 Posts	Re: Milk in valve covers "I have a 12 volt mattress air pump that will push or pull air that would help remove the moisture even faster." I mentioned earlier works well pulling the moisture out. Any condensation left in the crank case will settle to the bottom and I quickly remove the oil pan drain plug and any milky oil comes out first and I replace the plug quickly as soon as it runs clear, about a 1/2 of a cup or less will do it. If I had the money I would just put a belt driven air-vac pump on it. Last edited by Bimbo Jones; 05-06-2011 at 02:31 PM.