CLASS RACER FORUM - View Single Post

Kenney Kelley · 04-24-2011, 01:02 PM

The master cylinder is a good place to start looking . I also found the hoses going to the calipers and the one going to the rear end might look good on the outside but are plugged on the inside. We also changed the master cylinder and removed the stock proportation valve and replumbed the lines and that fixed our problem. I know this sounds like a lot of work but being able to stop on a short track is priceless. Kenney Kelley

04-24-2011, 01:02 PM	#4
Kenney Kelley Member Join Date: Dec 2006 Location: Cocoa Florida Posts: 200 Likes: 173 Liked 71 Times in 35 Posts	Re: Front Disc brakes are a "drag"....... The master cylinder is a good place to start looking . I also found the hoses going to the calipers and the one going to the rear end might look good on the outside but are plugged on the inside. We also changed the master cylinder and removed the stock proportation valve and replumbed the lines and that fixed our problem. I know this sounds like a lot of work but being able to stop on a short track is priceless. Kenney Kelley Last edited by Kenney Kelley; 04-24-2011 at 01:05 PM.