CLASS RACER FORUM - View Single Post

art leong · 03-23-2011, 08:07 PM

I have a .125 hole drilled in the throttle plate (throttle body) of my box manifold.
It idles aroud 2000 rpms. I thought it was needed due to the cams I'm running.
I put the individual throttle body manifold on and the car idles at 800 rpms so it isn't the cams.
The most I can get for vacuum with the box is 70 kpa, the ITB's idle at 50 kpa.
I want to close the hole up in the throttle plate.
What is the best way to do it?

03-23-2011, 08:07 PM	#1
art leong VIP Member Join Date: Dec 2001 Location: Richmond Hill, Georgia Posts: 2,003 Likes: 0 Liked 1 Time in 1 Post	Hole in throttle plate? I have a .125 hole drilled in the throttle plate (throttle body) of my box manifold. It idles aroud 2000 rpms. I thought it was needed due to the cams I'm running. I put the individual throttle body manifold on and the car idles at 800 rpms so it isn't the cams. The most I can get for vacuum with the box is 70 kpa, the ITB's idle at 50 kpa. I want to close the hole up in the throttle plate. What is the best way to do it? __________________ Art Leong 2095 SS