View Single Post
Old 01-05-2011, 04:08 PM   #13
X-TECH MAN
Banned
 
Join Date: Dec 2007
Location: Lake Placid, Florida
Posts: 3,203
Likes: 1,047
Liked 235 Times in 110 Posts
Default Re: OLDER ENGINE SPEC's

Quote:
Originally Posted by vic guilmino View Post
280,300,315,330
The 370 cu inch 280 HP you requested is 285 HP in the spec book.
Its rated at 10.0 compression
uses 1 4 barrel Carter AFB-2768Sor 2767S
1.5 rockers
70.2 CC's in the head
.000 Deck
uses inner and outer springs
Outer is 60 lbs closed and 109 open pressures
Inner is 26 lbs closed and 60 open pressures
Cam is Hyd. and has a checking clearence of 5-9 on the intake. The duration is 273 degrees and the overlap is 55 degrees. The intake lift is .411.
The Exhaust has a checking clearence of 5-11. The duration is 282 degrees with a lift of .411 also.
The intake valve is 1.880 and the exhaust is 1.600.
The head # is not listed and the head gasket is not listed either.

Last edited by X-TECH MAN; 01-05-2011 at 04:26 PM.
X-TECH MAN is offline   Reply With Quote