CLASS RACER FORUM - View Single Post

Rick Shirey · 10-03-2010, 07:59 PM

Danny, I have a 1983 Camaro that I built using Ed Quay parts to be super stock legal, including the modified front crossmember, I also used the headers he sells for his cars. When I purchased them it was suggested to get them just tack welded, which I did and was glad because most of the tubes had to be cut and repositioned before final welding. I also cut the flanges and made each side into three pieces which I found them easier to install that way. Bob at Quays is very helpful and patient. Good luck.

10-03-2010, 07:59 PM	#7
Rick Shirey Junior Member Join Date: Apr 2003 Posts: 53 Likes: 0 Liked 0 Times in 0 Posts	Re: 86 Camaro SS/GT headers? Danny, I have a 1983 Camaro that I built using Ed Quay parts to be super stock legal, including the modified front crossmember, I also used the headers he sells for his cars. When I purchased them it was suggested to get them just tack welded, which I did and was glad because most of the tubes had to be cut and repositioned before final welding. I also cut the flanges and made each side into three pieces which I found them easier to install that way. Bob at Quays is very helpful and patient. Good luck.