CLASS RACER FORUM - View Single Post - 82-92 Pinion Angle

Billy Nees · 07-03-2010, 08:51 AM

If it's an adjustable arm , I would start with the same angle as the trans to driveshaft angle. With that long an arm you don't need much. If your trans to driveshaft is nil then I would go with about 2 or 3 down.

07-03-2010, 08:51 AM	#4
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,499 Likes: 3,601 Liked 7,783 Times in 1,743 Posts	Re: 82-92 Pinion Angle If it's an adjustable arm , I would start with the same angle as the trans to driveshaft angle. With that long an arm you don't need much. If your trans to driveshaft is nil then I would go with about 2 or 3 down. __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K