CLASS RACER FORUM - View Single Post

buzzinhalfdozen · 03-14-2010, 07:53 PM

You should have no problems, I like to bend my own personally, however I've used a few S&w bars and they fit fine. Never used Jegs stuff however anyone with some experience bending up tubing should be able to fit a hoop quite nicely, I like to keep things tight to the car, however it adds time to the build due to welding access. Good luck with the project.Joe My pick is always CM as you save weight, and it goes a long ways if or when you sell the car.

03-14-2010, 07:53 PM	#11
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: 8 point roll bar comparison You should have no problems, I like to bend my own personally, however I've used a few S&w bars and they fit fine. Never used Jegs stuff however anyone with some experience bending up tubing should be able to fit a hoop quite nicely, I like to keep things tight to the car, however it adds time to the build due to welding access. Good luck with the project.Joe My pick is always CM as you save weight, and it goes a long ways if or when you sell the car. __________________ Joe Buchanan SS/BX 3117 Last edited by buzzinhalfdozen; 03-14-2010 at 07:56 PM.