CLASS RACER FORUM - View Single Post

Chad E532 · 08-30-2009, 09:10 PM

Today I made the first passes on a new set of 30x9x15 M/T ET Drag radials and after a couple runs I looked at the paint marks I had put on the tires to indicate where the valve stems were and I found that the LH tire had moved about 2 1/2" and the RH about 1". I was running 20psi in the radials so I am pretty surprised that they are spinning on the wheels.

Can a person install rim screws on a tubeless tire without leak issues?

Are there any other methods that do not require drilling holes in the rims?

Thanks in advance!
Chad

08-30-2009, 09:10 PM	#1
Chad E532 Member Join Date: Jul 2008 Location: Lindstrom MN Posts: 156 Likes: 7 Liked 54 Times in 7 Posts	ET Drag Radials Spinning On Wheels Today I made the first passes on a new set of 30x9x15 M/T ET Drag radials and after a couple runs I looked at the paint marks I had put on the tires to indicate where the valve stems were and I found that the LH tire had moved about 2 1/2" and the RH about 1". I was running 20psi in the radials so I am pretty surprised that they are spinning on the wheels. Can a person install rim screws on a tubeless tire without leak issues? Are there any other methods that do not require drilling holes in the rims? Thanks in advance! Chad